Nitrogen filling oven

0 Recenzije
Proizvod dostupan
iz €16,750.00 excl. tax
Nitrogen filling oven
  • Isporuka sa: More (35-50 dana)
  • Isporuka sa: Zrak (15-20 dana)
  • From warehouse in Belgium (1-3 dana)
pcs

Main technical parameters

Inside size (Depth*Width*Height)mm

800×800×1000

Dimensions(Depth*Width*Height)mm

About 1100×1540×1700

Temperature range

RT+20-200℃

Temperature fluctuation

±0.5℃

Temperature uniformity

±2.5℃%

Heating time

Normal temperature to 200℃≤40min

Total installed power

About 20.0KW

Voltage

380V±10%; 50Hz;Three-phase five-wire system

Noise

≤65dB(Test 1 meter away from the device)

Pollution, electromagnetic radiation

Comply with relevant standard requirements

The above product operating technical data are measured at room temperature 25℃, relative humidity ≤85%R.H, and no-load conditions in the test room.

 

Box structure

Structure

Adopting an integral left-right structure: The equipment is composed of

the test chamber body, air duct system, heating system, electrical

control, etc. The heater is located in the air duct and does not directly

radiate the test sample. The air duct circulation is used to ensure uniform

temperature in the working room. The control panel and instruments are

in the upper left part of the box with a reasonable structure and a

beautiful appearance.

Ventilation structure, non-vacuum filtration type.

Shell material

Cold-rolled steel plate is processed into shape, the surface is pickled and phosphated and then electrostatically sprayed (gray white)

Endosome material

SUS304# stainless steel plate, full welding process.

Insulation material

The insulation layer is filled with rock wool boards. The outside of the

box liner and between the liner and the outer shell are laid with asbestos

boards for heat insulation. The door and box are sealed with asbestos ropes.

Gate

Single door, the seal between the door and the box is made of asbestos rope.

Exhaust device

There is an exhaust hole device on the box, which can manually adjust the exhaust volume. Glass float flow meter.

Partition

3 layers, adjustable up and down

Partition load-bearing

20kg

Casters

Movable casters are installed at the bottom of the box to facilitate the movement of the equipment.

 

System composition

Control method

Forced internal circulation ventilation, the control system controls the

output of the heater according to the set temperature point through the

PID automatic calculation output result, and finally achieves a dynamic

balance.

Air circulation

device

Air duct circulation and external long-axis stainless steel centrifugal fan,

the motor is located at the bottom of the box

Heating method

1. Adopt nickel-chromium alloy electric heater and PID adjustment

2. Executive element: SSR solid state relay

 

Measurement and control system

Sensor

K type thermocouple temperature measurement

Temperature controller

It adopts 30-segment Japanese "conductive" programmable

high-precision digital display instrument, which can directly input, display

and control temperature; it has PID parameter self-tuning function; the

display resolution is 0.1℃; thus ensuring the high control quality of the

entire temperature system

Switch control

The blower switch and the heating switch are logically controlled

respectively. When the door is opened, the fan is turned off. If the fan is

not turned on, the heating will not run.

Mainly perform electrical appliances

"Schneider" AC contactor, "Omron" relay

Timer

A timer is installed, and when a scheduled shutdown is required, the

timing time control can be set

Power control

Sino-US joint venture "Lonning" solid state relay, zero-crossing trigger

power adjustment technology, reliable control, no noise, no grid pollution

Independent over-temperature protection

Studio independent over-temperature protection, sound and light alarm

How the system operates

Constant operation, program operation

 

Security protection function

1) Reliable grounding protection device;

2) Leakage/circuit break protection;

3) Heater short circuit protection;

4) The studio has independent over-temperature and sound and light alarms;

 

Host and random accessories:

Product certificate - 1 set

Product instruction manual -  1 set

Electrical schematic diagram - 1 set

Instrument instruction manual - 1 set

Warranty card -  1 serving

 

0 Recenzije

0.0 Cjelokupna ocjena

0 out of 0 (0%)
Kupci su preporučili ovaj proizvod

5
0
4
0
3
0
2
0
1
0

Napišite svoje mišljenje

Will be displayed on the comment.
Vaša recenzija mora imati najmanje 50 znakova.
+32 37 55 36 26
[email protected]
Telegram WhatsApp Instagram Facebook Signal